Search Results :

The Hex Pixhawk Cube+ Flight Controller Autopilot with ADSB Carrier Board flight controller comes with an H7 processor, features a 1,090 MHz ADS B receiver from Avionic, automatically avoids aircraft, and Is integrated into the new ADS B carrier board.

Through the parameter setting, the autopilot can optionally set up the cube to allow the vehicle to automatically avoid an aircraft that is detected in an exclusion zone set by the pilot.

Hobbywing 12KG Thrust Brushless Motor Combo

The X6 propulsion system, which integrates motor, ESC,

propeller and motor mount (with the optional 30 to 28 tube adapter,

it’s compatible with 28mm&30mm diameter carbon fiber arm tubes)

together, is easy to mount and use.

Latest model X6 Agriculture propulsion System integrated with ESC Motor, propeller and direct motor mount.

This motor mounts accepts Carbon tube of OD 28 to 30mm.

This is a professional agriculture motor designed and develped by hobbywing. They are designed for agriculture environment where payload is critical part.

This motor can take maximum thrust of 12KG but optimal effeciency for 5 to 8KG per motor. If you plan for a quad then total upweight it can take is 20KG. So 10KG drone weight and 10KG payload.

For a quadcopte it can take 20KG all up weight and for hexacopter will take all up weight of 30KG.

The NEO M8N provides the best performance and easiest RF integration of all the NEO M8 configurations. The NEO form factor allows easy migration from previous NEO generations. Sophisticated RF architecture and interference suppression ensure maximum performance even in GNSS hostile environments. NEO M8 combines a high level of robustness and integration capability with flexible connectivity options. The future proof NEO M8N includes an internal Flash that allows simple firmware upgrades for supporting additional GNSS systems.

The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC’s), which translates this desired speed into a signal that the motors can understand. This flight controller

APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5 and 2.6 with a Built in Compass for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller. However, the module has the option to use the built in compass an external compass via a jumper. This makes the APM 2.8 ideal for use with multi copters and rovers.

If you are wandering to become an Electronic geek and want to build some Cool Projects of Drone Then this module is for you. With this Control board, you can Enhance your Knowledge about Flight controllers as well as the working of the accelerometer and Gyroscope. The KK 2 Flight Controller Board with 6050 MPU Board and Atmel 644PA is the next generation of KK flight control boards. It comes preinstalled with the KK 2 firmware and features advanced processor technology from STMicroelectronics, sensor technology, InvenSense system delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

the DJI Naza M Lite Multi Rotor Flight Controller system. As the simplified version of NAZA M, it inherits the high reliability and stability of NAZA M. The innovative All in one design simplifies installation and saves space and weight.

It contains inner damping, controllers, 3 axis gyroscope, 3 axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.

DJI NAZA M V2 Multirotor Autopilot Controller set With GPS Supports nine multi rotor configurations, the DJI NAZA M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.

The Flysky FS i6S 2.4GHz 10CH AFHDS 2A RC Touch Control Transmitter With FS iA10B 2.4GHz 10CH Receiver constitutes a 10 channel 2.4GHz AFHDS 2A digital proportional computerized RC System.

FlySky Transmitter and Receiver is gaining so much popularity due to its originality and compatibility in high end drone projects and Hobbyists people are interested in this type of Transmitter.

The RadioMaster Pocket is a small, lightweight radio that packs a big punch. ExpressLRS version is come preinstalled with EdgeTX firmware. The Pocket is also equipped with removable stick ends and a foldable antenna, making it easy to transport and store. It is compatible with 18650 batteries, which provide long battery life for hours of fun.

The Radiomaster TX16S MKII HALL V4.0 is a popular radio transmitter designed for radio controlled models, and it’s often used in the RC hobby community. ExpressLRS is an open source, low latency, long range RC link firmware, and RP1 is one of the ExpressLRS receiver options.

Radiomaster TX12 MKII ExpressLRS EdgeTX Transmitter remote control with RP1 ExpressLRS 2.4ghz Nano Receiver is suitable for all types of fixed-wing aircraft, gliders, helicopters, cars, boats, robotics, multi-rotor aircraft, and anything else you might create, if you can build it this RadioMaster TX12 can control it.

The Skydroid C10 Pro is a sophisticated three axis gimbal camera designed for capturing smooth, stable footage in a variety of environments. Featuring advanced stabilization technology, the C10 Pro ensures that your shots remain steady even in challenging conditions, reducing the impact of vibrations and sudden movements.

This camera boasts high definition imaging capabilities, making it ideal for professional photography and videography. The three axis gimbal system effectively counteracts pitch, roll, and yaw movements, allowing for precise control and exceptional image clarity. With a user friendly interface and customizable settings, the Skydroid C10 Pro caters to both amateur enthusiasts and seasoned professionals.

Radiomaster Boxer is an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.

Features:

1. 4in1 (FCC) Version supports all MPM protocols.
2. Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM
3. Preinstalled EdgeTX firmware
4. 4-in-1 version capable of up to 20dBm RF output
5. QC3.0 fast charging support 2.0A MAX
6. Compact design with excellent ergonomics
7. New low-profile latching SE switch and momentary SF switch
8. Versatile 6-position switch for flight mode access
9. Adjustable and Removable T-shape Antenna
10. Industry-first fabric handle for improved portability
11. External module power slots in the battery cover

Package Includes:

1 x BOXER Radio

1 x Signature Carry Case

1 x T Antenna

1 x USB-C Cable

1 x Gimbal Protector

1 x 1.5mm Allen Key

2 x M4*4 Screws

4 x Low Tension Springs

1 x 18650 Battery Tray

1 x Brand Stickers

1 x User Manual

Radiomaster Boxer is an ideal choice for pilots on the go. Featuring full-size hall gimbals for precision control and an intuitive button layout, the BOXER gives you a compact radio without compromising on comfort and function.

Features:

1. 4in1 (FCC) Version supports all MPM protocols.
2. Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM
3. Preinstalled EdgeTX firmware
4. 4-in-1 version capable of up to 20dBm RF output
5. QC3.0 fast charging support 2.0A MAX
6. Compact design with excellent ergonomics
7. New low-profile latching SE switch and momentary SF switch
8. Versatile 6-position switch for flight mode access
9. Adjustable and Removable T-shape Antenna
10. Industry-first fabric handle for improved portability
11. External module power slots in the battery cover

Package Includes:

1 x BOXER Radio

1 x Signature Carry Case

1 x T Antenna

1 x USB-C Cable

1 x Gimbal Protector

1 x 1.5mm Allen Key

2 x M4*4 Screws

4 x Low Tension Springs

1 x 18650 Battery Tray

1 x Brand Stickers

1 x User Manual

If you are wandering to build a drone and don’t know what will be the best motor for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project. This motor provides a Motor kV of 920 and gives a thrust of 500 gm.

In the field of Multirotors, there are so many brands that are making drone motors but Ready to Sky is giving us the best quality of drone motor at an affordable price.

ReadytoSky 40A 2 4S ESC is specifically made for quadcopters and multi rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 40A 2 4S ESC comes with a multi integrated special program, fast throttle response, surpasses all kinds of open source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2 4s Lipo Battery.

An opto ESC isolates the high power side (battery and motor) from the signal side (connection to the receiver) by internally transmitting the receiver throttle signal from the input side to the output side of the ESC through an opto coupler.

ReadytoSky 30A 2 6S ESC is specifically made for quadcopters and multi rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 30A 2 6S ESC comes with a multi integrated special program, fast throttle response, surpasses all kinds of open source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this ESC is compatible with 2 6s Lipo Battery.