Sensor Module

 The Mauch 004-PL-200 Sensor Board is a versatile and reliable solution designed for accurate data acquisition in various applications, particularly in aerospace and robotics. Encased in a robust CFK (carbon fiber reinforced plastic) enclosure, this sensor board provides excellent durability while remaining lightweight. The 8AWG wiring ensures strong electrical connections, making it ideal for demanding environments that require dependable performance.

The Mauch 004-PL-200 Sensor Board is a high-precision voltage and current sensor designed for professional UAVs, drones, and high-power applications. This version comes with a CFK (Carbon Fiber Composite) enclosure for enhanced durability and 8AWG heavy-duty cables, ensuring minimal resistance and maximum efficiency in high-current systems.

Features:

1. The board features high-precision sensors for accurate measurements of voltage, current, and temperature.
2. Housed in a sturdy CFK enclosure, it offers enhanced protection while keeping weight to a minimum.
3. The 8AWG wiring allows for robust connections, supporting higher current applications and minimizing voltage drop.
4. Suitable for a variety of applications, including drones, RC vehicles, and other electronic systems that require precise monitoring.
5. Designed for easy integration, enabling quick setup with existing systems.
6. The user-friendly layout and connectors make installation and maintenance straightforward.

Package Includes:

1 X Mauch 004-PL-200 Sensor Board with CFK enclosure -8AWG

The Mauch 002-PL-100 Sensor Board is a robust and high-performance solution designed for accurate data monitoring in various applications, particularly in aerospace and robotics. Featuring a durable CFK (carbon fiber reinforced plastic) enclosure, this sensor board combines strength and lightweight properties. With 12AWG wiring, it ensures secure and efficient electrical connections, making it ideal for demanding environments.

The Mauch 002-PL-100 is a high-precision current and voltage sensor board designed to deliver accurate power monitoring for UAVs, robotics, and other electronic systems. This version includes a durable CFK (Carbon Fiber Composite) enclosure for superior protection and 12AWG high-quality silicone cables for reliable power delivery.

Capable of measuring currents up to 100A and designed for up to 14S (60V) LiPo configurations, the Mauch 002-PL-100 is engineered for use with the Mauch Power-Cube PL series and is fully compatible with popular flight controllers like Pixhawk. With a focus on stability, accuracy, and EMI resistance, this sensor board is ideal for both hobbyist and professional applications.

Features:

1. The sensor board is equipped with high-precision sensors for accurate voltage, current, and temperature measurements.
2. Its CFK enclosure provides exceptional durability while keeping the overall weight low.
3. With 12AWG wiring, it supports robust electrical connections and higher current handling.
4. Suitable for a wide range of applications, including drones, RC vehicles, and other electronic systems requiring precise monitoring.
5. Designed for straightforward integration, allowing for quick setup with existing systems.
6. User-friendly connectors and layout facilitate easy installation and maintenance.

Package Includes:

1 X Mauch 002-PL-100 Sensor Board with CFK Enclosure and 12AWG Cable

The Mauch 003-PL-200 Sensor Board is a cutting-edge solution designed for precise data collection and monitoring in various applications, particularly in the fields of robotics and drone technology. Housed in a durable CFK (carbon fiber reinforced plastic) enclosure, this sensor board combines lightweight construction with exceptional strength. The 10AWG wiring ensures robust connectivity, making it ideal for high-performance environments where reliability is crucial.

Features:

1. The board includes high-precision sensors for accurate measurements across various parameters.
2. It is housed in a durable CFK (carbon fiber reinforced plastic) enclosure, ensuring lightweight yet strong protection.
3. Equipped with 10AWG wiring, the sensor board allows for robust electrical connections and higher current handling.
4. Suitable for a wide range of applications, including drones, RC vehicles, and other electronics requiring precise monitoring.
5. Designed for easy integration with existing systems, allowing for quick and efficient setup.
6. The user-friendly layout and connectors facilitate straightforward installation and maintenance.

Package Includes:

1 X Mauch 003-PL-200 Sensor Board with CFK enclosure 10AWG Cable

Mauch 50A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details.

Features:

1. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard.
3. REM: The connector is Molex / Click-Mate / 1.25 mm / 4p (5023800400)
4. Without CFK enclosure = 27.5 x 19.5 x 10.5 mm / 17g (with 2x 10 cm 12AWG)
5. With CFK enclosure = 43.5 x 23.0 x 15 mm / 22g (with 2x 10 cm 12AWG)
6. Delivery in PP box: 55 x 55 x 20 mm / 33g
7. Delivery without sensor cable (comes with the BEC’s), with ABS/CFK enclosure

Notes:

1. Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub.
2. The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p.

Package Includes:

1 X Mauch PL-050 Power Sensor Board for UAVs and Drones with Voltage

SparkFun RedBoard Plus Development Board is an Arduino-compatible board that is similar to an Arduino Uno with many extra perks. This DEV-1858 development board utilizes a handy Qwiic Connect System that means no soldering or shields are required to connect it to the rest of the system. The RedBoard Plus board includes the hardware peripherals like 22x digital I/O pins with 6x PWM pins, 8x analog pins, UART, I2C, SPI, and external interrupts. 

This board uses the LM1117 5V voltage regulator and AP2112 3.3V voltage regulator that provides up to 600mA to daisy chain multiple Qwiic boards and sensors. The RedBoard Plus board comes with an I/O voltage switch also known as the “Red Squirrel” switch. This Red Squirrel switch can easily select the GPIO voltage between 3.3V to 5V. RedBoard Plus can be programmed over a USB-C cable with 5V input voltage or through the barrel jack from 7V to 15V input voltage. This development board features 32kB flash memory, 16MHz clock speed, all SMD construction, R3 shield compatibility, and an improved reset button. 

Features: 

1. Built-in resettable PTC fuse 5V/2A 
2. All SMD construction 
3. Improved reset button 
4. ATmega328P microcontroller with Optiboot (UNO) Bootloader 

Package Includes: 

1 x SparkFun RedBoard Plus 

We are quite familiar with seven-segment displays. We see them on our alarm clocks, ovens, and microwaves. By adding more segments to each digit you can display more than just numbers! Introducing the brand new SparkFun Qwiic Alphanumeric Display. These white fourteen-segment digits allow you to display all sorts of numbers, characters, and symbols. With Qwiic, simply plug it in and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required! 

Features: 

1. White display 
2. Operating Voltage: 3.3V 
3. Integrated RC oscillator 
4. Maximum display segment numbers: 128 patterns 

Package Includes: 

1 x SparkFun Qwiic White Alphanumeric Display I2C Interface for Easy Integration 

The SparkFun QuickLogic Thing Plus EOS™ S3, is a small form factor system ideal for enabling the next generation of low-power Machine Learning (ML) devices. The QuickLogic Thing Plus is powered by QuickLogic’s EOS S3, the first FPGA-enabled Arm Cortex©-M4F MCU to be fully supported with Zephyr RTOS and FreeRTOS. Unlike other development boards which are based on proprietary hardware and software tools, the QuickLogic Things Plus is based on 100% open-source hardware, compatible with the Feather form factor, and is built around 100% open source software (with support for FreeRTOS, Zephyr, Minden, Docker, and SymbiFlow). 

Between the onboard LiPo battery connector and charging circuitry, wake-on-sound PDM microphone, and low-power, three-axis accelerometer, this Thing Plus board is ideal for wearable, voice, gesture sensing applications. The strong firmware support for the microphone and accelerator makes it easy to move sensor data into the embedded FPGA. From there, you can use SensiML, TensorFlow Lite, or other tools to train and run embedded machine learning algorithms specific to your application. The board also includes a Qwiic connector to quickly interface with an ecosystem of 150+ I2C-compatible boards such as sensors, RFID readers, displays, keypads, and relays. 

Features: 

1. Single Cell LiPo battery 
2. On-board charging circuitry – Microchip MCP73831/2 
3. Standard LiPo JST connector 
4. SWD programming connector for use with USB-TTL converter 
5. USB data signals are tied to eFPGA programmable logic 
6. UART available via I/O headers 

Package Includes: 

1 x SparkFun QuickLogic Thing Plus – EOS S3 Development Board 

The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor from ST Microelectronics and housed in our standard Qwiic form factor. Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C without requiring any further calibration at the application level. 

The sensor operating mode is user-configurable and allows selecting between different ODRs (down to 1Hz) or the one-shot mode for battery saving. In one-shot mode, the sensor current consumption falls to 1.75µA. Peripheral addresses are also user-configurable and allow up to four different addresses to be specified by manipulating the jumpers on the back of the breakout. In addition, an interrupt pin is available to signal the application whenever the user-selectable high or low threshold has been exceeded. 

Features: 

1. High-accuracy digital temperature sensor with ±0.5°C typical accuracy
2. Ultra-low power consumption Ideal for battery-powered and remote sensing applications
3. I²C interface via Qwiic connector no soldering required
4. Selectable output data rates Up to 100HZ
5. Operating temperature range: -40°C to +125°C
6. Supports Low-Power and One-Shot modes
7. Compact breakout board design using STMicroelectronics STTS22H sensor
8. Compatible with 3.3V systems
9. Fully supported by SparkFun Qwiic ecosystem 

Package Includes: 

1 X SparkFun SEN-21262 Temperature Sensor STTS22H Qwiic

The Nordic Semiconductor nRF52840 Mini is a breakout and development board for the nRF52840, a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio from SparkFun. With the nRF52840 at the heart of your project, you’ll have access to an almost limitless number of project possibilities in a surprisingly small package. 

Most of the critical I/O pins, including GPIO and those required for power, are separated on our mini development board for the nRF52840, which has a footprint that is nearly identical to the Arduino Pro Mini (except those covered by the Qwiic Connector). It has a USB interface (which takes advantage of the nRF52840’s native USB support) that can be used to program, power, and communicate with the chip, allowing it to be used for any purpose (UART, I2C, SPI) that the Arduino Pro Mini can. A Raytac MDBT50Q-P1M module is included in the Pro nRF52840 Mini. This module connects the nRF52840 to a trace antenna, fits the IC into an FCC-approved footprint, and includes many of the decoupling and timing mechanisms that a bare nRF52840 design would require. A LiPo battery charger, a Qwiic connector, an on/off switch, a reset switch, and a user LED/button are also included onboard. 

Applications: 

1. Smart home (such as door locks, lighting) sensors and controllers 
2. Industrial IoT sensors and controllers 
3. Health/fitness sensor and monitor device 
4. Wearables with wireless secure payment 

Features: 

1. Low power requirements, ultra-low peak, average and idle mode power consumption. 
2. Be compatible with a large installed base of mobile phones, tablets, and computers. 
3. Fully coverage of BLE software stack. 
4. BLE & RF transmission switching helps products fit all operation systems and most hardware. 

Package Includes: 

1 X SparkFun Pro nRF52840 Mini Bluetooth Development Board for IoT & Embedded Projects

This is the SparkFun Time of Flight (ToF) Range Finder Sensor – VL6180 (Sparkfun), a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine the range, the VL6180 uses a precise clock to measure the time it takes light to bounce back from a surface. This affords the ToF Range Finder and VL6180 a great benefit over other methods because it can be much more accurate and more immune to noise. Does this technology sound familiar? Well it should, it’s the same means cellphones use to detect when the caller is holding their phone to their ear.  

Note: Though the datasheet states the VL6180 measures an absolute range of up to 10cm, we have successfully tested it up to 25cm.  

Features:  

1. 2.8V Regulator – Provides the required 2.8V for the sensor  
2. I2C Level Shifter – Provides logic level conversion from 2.8V to VCC  
3. 3-in-1 Module  
4. IR Emitter  
5. Range Sensor  
6. Ambient Light Sensor  
7. Measures absolute range up to 10cm  
8. Gesture Recognition  
9. I2C Interface  
10. Two Programmable GPIO  
11. Sharp Sensor Board Layout.  

Applications:  

1. Smartphones/portable touchscreen devices.  
2. Tablet/laptop/gaming devices.  
3. Domestic appliances/industrial devices.  

Package Includes:  

1 X SparkFun SEN-12785 Time of Flight (ToF) Range Finder Sensor VL6180

The SparkFun Thing Plus – RP2040 is a low-cost, high-performance board with flexible digital interfaces featuring the Raspberry Pi Foundation’s RP2040 microcontroller. Besides the Thing Plus or Feather footprint (with 18 GPIO pins), the board also includes an SD card slot, 16MB (128Mbit) flash memory, a JST single-cell battery connector (with a charging circuit and fuel gauge sensor), an addressable WS2812 RGB LED, JTAG PTH pins, four (4-40 screw) mounting holes, and our signature Qwiic connector. 

Features: 

1. 264kB of embedded SRAM in six banks 
2. 6 dedicated IO for SPI Flash (supporting XIP) 
3. 30 multifunction GPIO: 
4. Dedicated hardware for commonly used peripherals 
5. Programmable IO for extended peripheral support 
6. Four 12-bit ADC channels with an internal temperature sensor (up to 0.5 MSa/s) 
7. USB 1.1 Host/Device functionality 

Package Includes: 

1 x SparkFun Thing Plus RP2040 Development Board for IoT

The SparkFun IN100 NanoBeacon Board is a breakthrough in wireless low-energy BT beacon technology. With its minimal programming requirements and ultra-low power consumption, this board offers unparalleled efficiency. Featuring the IN100 NanoBeacon from InPlay, it complies with various standard 2.4 GHz protocols and boasts configurable features that significantly reduce power usage, ensuring years of continuous operation in the field. Whether you need wireless sensor monitoring, asset tracking, or real-time location monitoring, this board is the ideal solution. 

Powering the IN100 is a breeze, as it can be operated by a single 3V coin cell battery. To facilitate this, It incorporates a 12mm coin cell battery holder (CR1225 battery not included) into the design. Additionally, seamless integration into our expanding Qwiic ecosystem is made possible through the inclusion of a Qwiic connector. On one side of the board, you’ll find a UART interface breakout for easy serial communication using a 0.1″-spaced through-hole header and Serial Basic. The other side features four of the IN100’s GPIO pins (4-7), along with the two I/O power switch pins (SW0 and SW1). Lastly, we’ve included a designated “Notes” space on the back of the board, allowing you to jot down any necessary information or labels for quick identification of different NanoBeacon boards. 

Features: 

1. IN100 NanoBeacon 
2. 2.4GHz BT Beacon module 
3. Supply Voltage Range: 1.1-3.6V 
4. Ultra Low Power: < 650nA in Sleep Mode 
5. Beacon Modes: Proprietary, BT, Google Eddystone, and Apple iBeacon compliant 
6. Through Hole Pins (Male headers pre-soldered): 
7. 3.3V UART 
8. 4 GPIO 
9. 2 Switch Pins 
10. Coin Cell Battery Holder 
11. Fits a 3V CR1225 battery 
12. 1x Vertical Qwiic Connector 

Package Includes: 

1 x SparkFun NanoBeacon Board – IN100 

The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell’s 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60 bar to 2.5bar, easy to read 24-bit digital I2C output. 

Each Qwiic MicroPressure Sensor has a calibrated pressure sensing range from 1-25psi and a power consumption rate as low as 0.01mW Typ. average power, 1Hz measurement frequency for ultimate portability. 

This pressure sensor comes with a metal port. You can easily attach a tube to it, to measure air pressure inside a close space. It is a great sensor for the pressure within a vacuum chamber or other pressurized container. You can use it to measure the level of water if you put the tube in the water. 

Features: 

1. Low power consumption 
2. I2C communication support 
3. Qwiic Connect for easy wiring 
4. High-precision pressure measurement 
5. Defined pressure range 

Package Includes: 

1 X SparkFun SEN-16476 Qwiic MicroPressure Sensor I2C communication