Receiver

This Flysky FS2A 4CH Receiver mini, fully integrated transmitter and receiver PWM output is the perfect solution for rc car racing and beginners. Adopts metal material, wear-resisting, and corrosion-resistant. This product is a wireless rc receiver for fpv racing, compatible with the transmitter and receiver board. Mini size and lightweight, easy to carry. Compatible for receiver and transmitter remote control. The receiver is small in size, light in weight, easy to carry and store. In the meantime, this product is suitable for micro receiver and pwm, as long as the transmitter set up, it can meet the needs of different users. With output port, you can directly connect to the receiver. The transmitter can be used for direct power supply, tv, dvd receiver and so on. This is a wireless remote control, and can be used as an independent diy or portable electronic device. This product adopts high quality abs material, with strong durability and stability, longterm use of advanced control chip. The product adopts high quality metal material, which is durable and you can use it with confidence of its excellent performance. Plug and play, compatible with most rc brands such as fj series transmitter, rc helicopter, toy car and so on.

Compatible Transmitters : FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol

Features: 

1. Small in size
2. Easy to install
3. Low power consumations
4. high qulity product
5. Color: Black

Package Includes: 

1 x Flysky FS2A 4CH Receiver

Building on the previous flysky iA6B receiver, FlySky is now providing a 10 channel version of the receiver called the FlySky FS-IA10B Radio Receiver. Like the FS-iA6B the iA10B is capable of iBUS, SBUS, PPM and PWM for enhanced control.

The advantage of PPM / SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel – hence for PPM compatible flight controllers such as the Naze -32 , the wiring is greatly simplified. Furthermore, with the optional telemetry sensors, you can expand the receiver’s compatibility to monitor flight battery voltage and even things like motor RPM.

This full 10 channel receiver works for most models and is considered a “full range” so it can handle larger models as well as the smaller ones. Dual antennas give the FS-iA10B for unparalleled reception (reported at well over 1km) and interference rejection capability. For best results, makes sure the antennas are set at a 90-degree angle from each other.

The FS-iA10B is slightly larger than the FS-iA6B (see product pic), but it’s still compact and it features end-on connectors to enable a neat installation in tight spaces.

How to bind the RX (receiver) to the TX (transmitter):

1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli

Compatible Radios:

1. Flysky i4
2. Flysky / Turnigy i6
3. Flysky / Turnigy i10
4. Flysky FS-i10
5. FS-GT2E
6. FS-GT2G

Note: 

If you want to use PPM, remember to enable the setting on your transmitter.

Features:

1. Reliable, interference-free 2.4GHz AFHDS 2A signal operation
2. Compact, lightweight design
3. Dual antennas for reliable, interference-free operation
4. Connection ports for use with optional telemetry sensors

Package Includes:

1 x FlySky FS-IA10B Radio Receiver

1 x Bind Plug

FlySky FS-R9B 2.4G 8CH Receiver is very low power consumption and high receiving sensitivity receiver. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be one of the best systems available in the market.

Its 2.4GHz is the standard of new generation radio system because it has a lot of advantages. Operating at 2.4 GHz puts the radio control out of the frequency range of any ‘noise’ generated by the other electronic components on your helicopters – such as the brushless motor, Electronic speed controller, Servos and any metal to metal noise – eliminating interference and glitching that can affect traditional frequency system.

How to bind the RX (receiver) to the TX (transmitter):

1. Plug bind plug into BAT, turn on plane/heli, the LED light should flash (make sure power is connected to RX via ESC)
2. Hold down bind button on transmitter module while turning on the TX
3. The light should go steady now
4. Let go of bind button, turn off plane/heli, remove bind plug, turn off TX
5. Turn on TX and then turn on plane/heli

Features:

1. AFHDS –2.4GHz system
2. SC port: PPM/i-BUS/S.BUS
3. Channel delay is <15mS
4. Low Power Consumption and high reliability
5. Stable performance
6.  Certificate: CE, FCC
7. Usage: suit for Fixed-wing copters, helicopters, etc

Package Includes:

1 x FlySky FS-R9B 2.4G 8CH Receiver

1 x Bind Key

FlySky FS-GR3E 2.4G 3CH Receiver is all new function with waterproof protection RC receiver, so now you could also enjoy your rc world when raining or moisture day.

The receiver is compatible with many transmitters like FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S.  This 3 Channel receiver is very easy to bind very fast link-up, strong signal distance.

Features:

1. Reliable, interference-free 2.4GHz AFHDS signal operation
2. This 3CH receiver is very easy to bind, very fast link-up, strong signal distance
3. Quick and extremely stable in performance
4. 3 channels for RC models such as cars, trucks, buggy, boats
5.  Waterproof AFHDS 2.4GHz 3-channel receiver
6. Suitable for GT3B/GT2/GT3C transmitter

Package Includes:

1 x Flysky FS-GR3E Receiver

1 x Antenna tube

1 x Bind plug.

If you want to be an electronic geek and have a knack for copters and how they work, Then the receiver is one of the most important parts to understand because, without it, you won’t be able to interpret with your drone.

The FlySky FS-A8S 2.4G 8CH Mini Receiver Rev 2 is built for use in multi-rotor drones and is a 1-way receiver (no telemetry).

In the world of racing of drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-A8S receiver fits these requirements superbly by being the only 20x14x5.3mm in size and 1.2gm in weight.

It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 18 channels.

This is an excellent addition to your FS-i4, FS-i6 FS-i6S FS-i6x , FS-i10, FS-GT2E, FS-GT2G, FS-GT2F, etc. FS series RC Transmitter.

Features :

1. AFHDS 2A –2.4GHz system.
2. SC port: PPM/i-BUS/S.BUS.
3. The channel delay is <15mS.
4. Certificate: CE0678.
5. FCCID: N45ZA8S00.
6. Low Voltage Alarm: No.
7. Online update: No.
8. Compatible with: FS i4 i6 i6S i6X TM10 TM8 Transmitter.

Package Includes :

1 x FlySky FS-A8S 2.4G 8CH Mini Receiver module Rev 2.

1 x Connecting Cable.

This is a FS-R6B FlySky 2.4Ghz 6CH Receiver for RC FS-CT6B TH9x.

If you want to be an electronic geek and have a knack for copters and how they work, Then the receiver is one of the most important parts to understand because, without it, you won’t be able to interpret with your drone.

In the world of racing drones, the basic requirement is for small and lightweight components that will make a drone more and more nimble. This FS-R8S receiver fits these requirements superbly by being very small in size and light in weight. The receiver supports AFHDS ( Automatic Frequency Hopping Digital System) and is a digital protocol that ensures 2 or more radios can operate at the same time without interfering with each other’s respective aircraft. The signal range of the receiver is about 500-1000 m. Its tiny and lightweight size with the best features in the class like 3.5-5V operating power requirement and the radio frequency range makes it suitable for your quadcopter Application.

If you want to buy FS-CT6B or TH9X transmitter (Remote Control) for your drone, then click on the respective name below

FlySky CT6B 2.4Ghz 6CH Transmitter with FS-R6B Receiver

FS-TH9X 2.4GHz 9CH Upgrade Transmitter with FS-IA10B Receiver

To Explore more Drone Transmitter and Receivers, 

Features :

1. Item Name: FS-R6B Receiver
2. Brand Name: Flysky
3. 100% Brand New
4. RF power: less than 20DBm
5. modulation: GFSK
6. Code type: PCM
7. Sensitivity: 1024
8. Low voltage warning: LED
9. Charger port
10. Certificate: CE,FCC,RoHS

Package Includes :

1 x FS-R6B FlySky 2.4Ghz 6CH Receiver

Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter for all of those FlySky users looking for a good micro receiver, this is it!!!

It’s not much bigger than the DasMikro V2; another micro FlySky compatible Rx, but it boasts more channels and greater range.

Like the DasMikro it outputs 8-channels using PPM, but it then supports 18-channels using SBUS. The advantage of PPM/SBUS over traditional PWM channels is that you only need to use one signal wire, rather than one for each PWM channel.

Because of its micro size, it’s ideally suited to micro quads, like the racing quads.

The module is compatible with FS-i10, FS-i6S, FS-i6X, FS-TM10, FS-TM8 etc.

Pin Description:

Black: GND

Red: VCC 4.5V-6V

White: SUBS

Blue: PPM

Package Includes :

1 x Mini Radio Receiver 2.4GHz.

The FrSky Smart Port RPM and Temperature Sensor have been designed to work with FrSky Smart Port systems, it can measure the RPM of brushless motors from 1,000~30,000rpm and temperatures of -20 to 250 degrees Celsius. Other FrSky Smart Port-enabled sensors including the variometer, lipo voltage, GPS, current, and airspeed sensors can be used at the same time.

Installing is easy, just connect the sensor to any 2 wires on the brushless motor by the supplied JST cable and then plug the smart port lead into the smart port-enabled receiver. 2 temperature sensors are supplied which are plugged into the PCB so you can use a single one or both. Attach the temperature sensor to your ESC to enjoy the full benefit and peace of mind from this fantastic product. Set up is very straightforward using the push button and LED status indicator. Please note: The FrSky Smart Port RPM/Temperature Sensor is only compatible with FrSky Smart Port-enabled receivers such as the X8R, X6R, and X4R.

Features:

1. Simple and easy to install
2. Small and lightweight
3. LED status indicator
4. Easy push button setup

Package includes:

1 X FrSky Smart Port RPM and Temperature Sensor

This is the FrSky Archer Plus RS Mini Receiver. The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.

The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, but they also support even more functions like configurable telemetry power (RS), S.Port / F.Port / FBUS switching, and VFR indicators.

The RS Mini version provides the optimal model-building solution that uses an onboard PCB-type antenna to reduce the building hassle of using the traditional ones and removes the soldering problems by adding a wire connector to lead the external device more easily.

Features:

1. Tiny and super lightweight
2. S.Port / F.Port / FBUS (Configurable via S.Port)
3. The control range for the FrSky Archer Plus RS Receiver is ≥600m, though it may vary based on local conditions.
4. Over-The-Air (OTA) FW update
5. SBUS Out port (Supports 16CH / 24CH mode)
6. Onboard PCB-type antenna
7. Easily plug wire connector without soldering

Package Includes:

1 x FrSky Archer Plus RS Mini Receiver

1 x Connecting cable

This FrSky 6/16 Channels RX6R Receiver is a standalone receiver with all the functions of X6R, it features 6 PWM outputs with extremely high precision and low latency. The latency of PWM output is 9ms less than that of the X6R in high speed mode. The RX6R features the redundancy function as well, this means you can add another receiver as a back-up in case the first one fails. Last but not least, the RX6R and the whole RX-line has a 40% increase in range compared to the previous X series receivers.

Features:

1. High sensitivity (40% Increase of the range compared to previous X series receivers)
2. Higher precision PWM
3. The FrSky XM Plus Receiver features 16 channels, with 1 to 6 channels utilizing PWM from conventional channel outputs, while all 16 channels are available from the SBUS OUT port.
4. It offers an operating range of over 2km.
5. The FrSky XM Plus Receiver has a servo frame rate of 9ms in High-Speed Mode (HS) and 18ms in Normal Speed Mode (FS).
6. Lower latency PWM
7. Lower power consumption
8. Supports redundancy function
9. Smart Port enabled and supports telemetry data transmission
10. Battery voltage detection
11. 2 detachable IPEX 4 Connector antennas
12. PCB protection with the conformal coating craftwork

Package Includes:

1 x FrSky 6/16 Channels RX6R Receiver

1 x Connecting cable set

The FrSky R9 MM is the latest 900MHz mini receiver in the long-range series. It carries on most of the features from the previous R9 Mini receiver, like its super low latency, and high precision performance in an extremely compact design. A new feature incorporating an inverted S.Port output makes it compatible with more devices.

Features:

1. 915MHz (Non-EU Version)/ 868MHz(EU Version)
2. Mini size and superlight weight
3. Inverted S.Port enabled
4. S.Port enabled and supported telemetry data transmission
5. (Support F.Port, download firmware to support the function)
6. Low latency and high precision
7. With RSSI output in SBUS
8. Battery voltage detection supported
9. Detachable Ipex connector antenna

Package Includes:

1 x FrSky R9 MM-OTA

TWIN series TWGR6 receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time.

This receiver is designed for RC users who want to benefit from resilience and long-range in their radio communications, typically up to tens of kilometers is achievable. TWGR6 receiver features an upgraded high-precision variometer that gives pilots quick, accurate altitude and vertical speed data and is ideal for any type of glider pilot.

Features:

1. Simultaneous working dual 2.4G TW mode
2. High-precision variometer sensor
3. Black-Box function
4. 4 ms race mode with telemetry

Package Includes:

1 x FrSky DUAL 2.4GHz TWGR6 Receiver

This is the FrSky Archer Plus RS Receiver. The Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.

The Archer Plus Series receivers include some new features. Firstly, an enhanced anti-RF-Interference capability can offer a more solid and stable RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, but they support even more functions like configurable telemetry power (RS), S.Port / F.Port / FBUS switching, and VFR indicators.

The RS supports full-range signal control with an equivalent telemetry range. Dual detachable/replaceable antennas assure optimal antenna reception and maximum range with their lightweight design thanks to the extremely tiny form factor. Features an inverted S.Port that allows for easily connecting flight controllers, in addition to all this, the RS can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with an SBUS port. The best available signal will be used to ensure superior connectivity.

Features:

1. Tiny and super lightweight
2. S.Port / F.Port / FBUS (Configurable via S.Port)
3. Over-The-Air (OTA) FW update
4. Full range of telemetry, with a control range of at least 2km (Control range may vary based on local conditions)
5. SBUS Out port (Supports 16CH / 24CH mode)
6. SBUS In port (Supports Signal Redundancy)
7. Inverted S.Port

Package Includes:

1 x FrSky Archer Plus RS Receiver

This FrSky RXSR Ultra Mini Receiver is the evolution of the FrSky full-range XSR receiver. The R-XSR is a standalone receiver with all the functions of XSR, in addition, it’s almost 1/3 size and 1/3 weight of an XSR receiver. Moreover, there redundancy function is integrated into this tiny receiver to ensure security, and the IPEX connector makes it more convenient for you to replace antennas.

The R-XSR is an ACCESS-compatible receiver, by flashing the ACCESS firmware it can be re-bound at any time without accessing the F/S button once it is registered to an ACCESS radio.

Features:

1. Easy to use
2. Good quality product
3. Compact sized
4. Ultra mini size and lightweight
5. Support telemetry and Smart Port enabled
6. Full range
7. The FrSky X4R-SB Receiver supports 16 channels, with channels 1-16 from the SBUS channel and channels 1-8 from the CPPM channel
8. It features firmware upgradability.
9. Switchable SBUS/ CPPM signal output
10. Supports redundancy function.
11. IPEX connector, replaceable antennas

Package Includes:

1 x FrSky RXSR Ultra Mini Receiver

1 x connecting cable

FrSky R9 STAB OTA telemetry receiver. It is a 900MHz/868MHz long-range and stabilization receiver with a built-in 3-axis gyroscope and 3-axis accelerometer. In order to fully enjoy the benefits of this system, please read the instruction manual carefully.

R9 STAB OTA has 8 PWM channels, on traditional fixed-wing models it will support stabilization, automatic level, hover and knife-edge flight modes. For delta wings and V-tail models, it supports stabilization and automatic level flight modes.

R9 STAB OTA receiver implements the ACCESS protocol and brings the user improved performance and features. It supports wireless over-the-air firmware updates, making binding to receivers even easier as well as conveniently checking the current receiver firmware version.

MULTIPLE FLIGHT MODES

R9 STAB OTA has 8 PWM channels, on traditional fixed-wing models it will support stabilization, automatic level, hover and knife-edge flight modes. For delta wings and V-tail models, it supports stabilization and automatic level flight modes.

Features:

1. ACCESS protocol and supports OTA functions
2. 900MHz/868MHz long-range with low latency
3. Built-in 3-axis gyroscope and 3-axis accelerometer
4. Support S.Port
5. Supports quick configuration for setting multiple flight modes (quick mode)
6. Detachable Ipex1 connector antenna
7. Low Battery voltage detection supported
8. Multiple configuration methods (LUA script and FreeLink)

Packages Includes:

1 x Frsky R9 stab OTA Receiver

1 x Instructions Manual

This is FrSky V8FR-II 8 Channel Receiver. V8FR-II will operate as normal with your Telemetry module without having to switch over to none telemetry mode. Also compatible with the none telemetry modules. Compatible with V8_mode & D_mode.

Features:

1. Easy to use
2. The FrSky XM Plus Receiver offers a full operating range of over 1.5km.
3. Easy to connect
4. Good quality product
5. Compatible with all FrSky modules (V8_mode & D_mode), receive only (V8FR-II can talk with the module of either mode, but it does not send telemetry information back to the transmitter).

Package Includes:

1 x FrSky V8FR-II 8 Channel Receiver

The X8R is in a smaller package than the previous 8 channel receivers but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors.

The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second.

The X8 protocol is also backward compatible! In D8 mode it works with the DHT, DJT, DFT, and DHT-U transmitter modules. In this mode, you only have access to 8 channels but you still get to use the new Smart Port and digital sensors! And even cooler is the new antenna design “PCB” it reports up to a 20% gain in range over their older antennas. And the X8R is Firmware Upgradeable!

This is the perfect receiver for the FrSky Taranis, with its built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

Features:

1. With RSSI PWM output (0~3.3V)
2. Parallel two X8R to become a 16 channel receiver.
3. SmartPort enabled realizing two-way full-duplex transmission.
4. More number of channels: 1~8ch from conventional channel outputs 1~16ch from SBUS port or combine two X8R to become a 16 channels receiver.
5. All 16 channels require the FrSky Taranis or the XJT module bound in D16 mode. For 8 channels in D8 Mode, you can use the FrSky Taranis or XJT DJT DFT DHT and DHT-U modules.

Package Includes:

1 x FrSky X8R 8/16ch Full Duplex Telemetry Receiver

The FrSky RX8R Pro is an upgraded version of the RX8R receiver, it has all the same features including redundancy. The new ‘Pro’ version has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. Another feature that is new with the RX8R Pro is the reduction of interference caused by the ignition process.

Features:

1. Strong anti-interference performance in the ignition process
2. Higher precision of PWM
3. Lower latency on the PWM output
4. Support redundancy function
5. Smart Port enabled and support telemetry data transmission

The Redundancy Function

For the master and slave receivers, when the master receiver goes into failsafe, the output signal from the slave receiver will be used until the master receiver works again.

Package Includes:

1 x FrSky RX8R Pro 2.4G ACCST 8/16CH SBUS Telemetry Receiver

1 x User Manual