No products in the cart.
ISDT ESC 70 Wp 1080 70A Brushed Motor Waterproof Esc 2-3S 5V-7.5V
An electronic speed control follows a speed reference signal (derived from a throttle lever, joystick, or other manual input) and varies the switching rate of a network of field effect transistors (FETs). By adjusting the duty cycle or switching frequency of the transistors, the speed of the motor is changed.
Features:
- Fully waterproof design for all conditions
- ESC gives great performance for your project
- Advanced electronic switch and Bluetooth two-in-one module
- Support real-time operating parameters and status via the ISD Go APP
- Built-in BEC with adjustable output features
product Includes:
1 X ISDT ESC70 WP 1080 70A Waterproof ESC 2-3S 5V-7.5V
Hobbywing 40A XRotor V1 Brushless ESC 2-6S LiPo
- Model Number:XRotor-40A
- Cont.Current:40A
- Burst Current(10sec):60A
- BEC: None
- Lipo:2-6S
- Programming:Timing (high/middle)
- Weight:26g
Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.
The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.
Features:
- Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
- Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
- Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
- A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
- Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
- Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
- Ultra-low resistance MOSFET, strong flow capacity.
30A 1-6s Electronic Switch PWM 3.7-27V Input
30A 1-6s Electronic Switch PWM 3.7-27V Input
This module functions as a compact relay switch, activated through an auxiliary channel on your receiver. It’s ideal for controlling lights, sound, and other auxiliary electrical devices. The switch engages when the PWM duty cycle exceeds 1500µs and disengages when it falls below 1400µs.
Normal Mode:
The module can detect pulse widths ranging from 400 to 2600µs. If the pulse width exceeds 1800µs, the MOSFET switch will close; if it drops below 1200µs, the switch will open.
Safe-Protection Function:
This module includes a safe-protection feature to minimize the risk of unintended activation. Safe-protection mode activates under the following conditions:
1. If the pulse exceeds 1800µs at power-up, the MOSFET switch will remain open, and the LED will blink. Move the input to the off position to switch to normal mode.
2. If the signal is poor for more than 500ms, the MOSFET switch will open, and the LED will blink. When a good signal is restored, the device will deactivate safe-protection mode.
LED Indicators:
– In normal mode, the LED lights up when the input pulse is greater than 1800µs and turns off when it’s less than 1200µs.
– In safe-protection mode, the LED blinks rapidly.
30A RC Controlled Switch:
This switch supports high currents and has high reliability, making it suitable for high-voltage receivers. Its compact and lightweight design includes 18AWG silicone wires for power and super-soft silicone wires for the signal.
When the switch is activated, an LED indicates that the current must not exceed the nominal value, as doing so may cause the wires to heat up or burn.
Features:
- Applied to remote control model car aeroplane Lightbar Light on and off Application is simple and convenient – Insert switch channel.
- Power switch for various power supply and controlled equipment (disconnected to the positive pole, common negative).
- Electronic ignition, the output stage can be connected to the resistance heating wire.
- The electric start control increases the relay and the water pump switch.
- The wire adopts high current 18AWG silica gel wire, the plug is JST head (input female, output male), the signal wire is also made of super-soft silicone wire material, the total length of the power cord is about 20CM, the switch weight is about 11G.
- Support High Voltage (HV) Receivers
- Suggest 2 section control, ON/OFF stroke takes half of the travel for each.
Specifications:
| Max Current (A) | 30A |
| Allowed Wire Size (AWG): | 18 |
| Plug Type | JST |
| Cable Length (cm) | 20 |
| Net weight (g): | 9 |
T Motor Air 40A Esc
The T-Motor 40A AIR Multirotor ESC is compatible with various flight-control systems and supports a signal frequency of up to 621 Hz. It has a special core program for multi-rotor controllers that greatly improves throttle response and specially optimized software for excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. All settings except the timing are preset, making usage simple, highly intelligent and adaptive.
Feature:
- Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
- 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
- Throttle range can be configured and is fully compatible with all transmitters currently available on market.
- Smooth, linear and precise throttle response.
- Our pocket-sized Program Card can be purchased separately for extremely easily programming the ESC at the field.
- With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs that can be selected
Package includes :
1 x TIGER MOTOR FLAME 40A HV ESC
Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
The Axisflying 80A+F405/F722 STACK is built to handle demanding drone applications, especially for heavy builds or high-speed flight that require precise control and reliable power management.
Features:
- High Continuous Current: 80A per motor, providing strong power output to handle larger propellers and heavier drone builds.
- 6-8S LiPo Compatibility: Supports high-voltage input for enhanced performance and longer flight times.
- BLHeli_32 Firmware: Equipped with BLHeli_32 firmware, which supports advanced settings like RPM filtering, bidirectional DSHOT, and smooth throttle response.
- Advanced Protection: Includes over-current, over-temperature, and voltage monitoring for safe operation.
- F405/F722 Processor: Option between F405 and F722 processors; both deliver responsive flight control, with the F722 offering enhanced processing power for complex tasks.
- Betaflight OSD: Integrated OSD for in-flight monitoring of voltage, current, and other critical data on the FPV display.
- Multiple UART Ports: Available UART ports for peripherals like GPS, VTX, and Crossfire receivers.
- Gyro: MPU6000 gyro for stable, precise flight performance, even in high-vibration environments.
- Blackbox Logging: Flash memory for flight data logging, enabling post-flight analysis and tuning adjustments.Multiple UART Ports
Package Includes:
1 x Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
AxisFlying Argus PRO 32bit 65A 3-6S 30x30 4in1 ESC For Drones
The Axisflying Argus PRO ESC 65A is a high-performance electronic speed controller designed for demanding FPV drone applications. This ESC is part of the Argus PRO series, which integrates advanced technology with robust construction, ensuring reliable performance in various environments.
Features:
- IP54 Protection: Dustproof and splashproof design (not for underwater use).
- CNC Aluminum Cover: Enhances heat dissipation and stability during operation.
- High-Quality MOSFETs: Low internal resistance for improved power performance.
- Plug-and-Play Connectivity: Directly connects to various peripherals without soldering.
- Integrated Dual BEC: Supports direct connection for DJI O3 Air Unit.
- Up to 8 Motor Outputs: Compatible with X8 drone configurations.
- Status Indicator Lights: Easily check the working status of the flight controller.
Package Includes:
1 x Axisflying Argus PRO ESC 65A 3-6S 32Bit
1x To FC Cable
1x Rubber Ring
1x XT60 Power Cord
1x Ruby 35V 470μF Capacitor
1x SH1.0 8P Plastic Case (for FC Line)
Holybro Tekko32 F4 4in1 50A ESC STACK For Drones
Holybro Tekko32 F4 4in1 50A ESC is one of the first 4-In-1 ESC to adapt fast F4 MCU @ 150MHz for smooth control operation and quick response.
The Holybro Tekko32 F4 4-in-1 50A ESC Stack is a high-performance electronic speed controller (ESC) designed for FPV racing and freestyle drones. It integrates a Tekko32 F4 4-in-1 50A ESC with a Holybro Kakute H7 Flight Controller, offering smooth and powerful motor control with advanced features.
Features:
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16K to 96K
- A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Holybro Tekko32 F4 50A BLHeli_32 4-In-1 ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 4-in-1 60A ESC BLheli_32 Dshot 1200
The Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller. This compact 4-in-1 ESC is designed with a 30×30 mounting pattern and supports 3-6S LiPo batteries. It has all new High-quality MOSFETs with low internal resistance and low heat generation, ensuring efficient power delivery and a smooth flight experience while allowing the ESC to boast a continuous current of 60A. It has a separate drive and control circuit to broaden the current capability of the drive circuit while reducing electrical interference in the control circuit. With its cutting-edge BLHeli_32 firmware and 96K PWM frequency, enjoy lightning-fast response times and exceptional motor control.
Features:
- All new High-quality MOSFETs with low internal resistance and low heat generation
- Fast F4 MCU @150MHz (compared to F3 @108MHz & F0 @48MHz)
- A separate drive and control circuit, reducing the electrical interference
- Continuous Current Rating of 60 Amps
- Supports DShot 150/300/600/1200/2400
- Supports MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120
Package Includes:
1x Tekko32 F4 4in1 60A ESC
4x M3 Anti-Vibration Silicone Grommet Insert
1x Electrolytic capacitor: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 Metal 4-in-1 65A ESC (AM32) Dshot 1200
The Tekko32 Metal stands out as the market’s first 4in1 ESC to incorporate the swift F4 MCU operating at 150Mhz. It features a robust metal-cased MOSFET and supports PWM output up to 96K, suitable for 4~6S setups, and runs on BLHELI32 firmware. This ESC is renowned for its power and reliability, offering smooth control and a rapid response.
Features:
- New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM output up to 96K (default 48K)
- Metal-cased MOSFET for excellent heat dissipation
- Massive on-board capacitance for noise filtering at 2068uf
- 3 oz copper PCB design to allow bigger current and better heat dissipation
- Separate drive & control circuit, this broadens the current capability of the drive
- circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Tekko32 F4 Metal 4in1 65A ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Kakute Tekko32 F4 4in1 mini 50A ESC
The Holybro Tekko32 F4 4in1 Mini 50A ESC is a high-performance electronic speed controller designed for quadcopters and other multirotor aircraft. It features new high-quality MOSFETs with low internal resistance and heat generation, each equipped with individual metal heatsinks for optimal cooling.
Features:
- All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- Separate drive & control circuit, reducing the electrical interference to the control circuit
Package includes:
1 x Tekko32 F4 4in1 mini 50A ESC
4 x M2 Anti-Vibration Silicone Grommet Insert
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacito: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
ISDT ESC 70 Wp 1080 70A Brushed Motor Waterproof Esc 2-3S 5V-7.5V
An electronic speed control follows a speed reference signal (derived from a throttle lever, joystick, or other manual input) and varies the switching rate of a network of field effect transistors (FETs). By adjusting the duty cycle or switching frequency of the transistors, the speed of the motor is changed.
Features:
- Fully waterproof design for all conditions
- ESC gives great performance for your project
- Advanced electronic switch and Bluetooth two-in-one module
- Support real-time operating parameters and status via the ISD Go APP
- Built-in BEC with adjustable output features
product Includes:
1 X ISDT ESC70 WP 1080 70A Waterproof ESC 2-3S 5V-7.5V
Hobbywing 40A XRotor V1 Brushless ESC 2-6S LiPo
- Model Number:XRotor-40A
- Cont.Current:40A
- Burst Current(10sec):60A
- BEC: None
- Lipo:2-6S
- Programming:Timing (high/middle)
- Weight:26g
Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.
The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.
Features:
- Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
- Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
- Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
- A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
- Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
- Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
- Ultra-low resistance MOSFET, strong flow capacity.
30A 1-6s Electronic Switch PWM 3.7-27V Input
30A 1-6s Electronic Switch PWM 3.7-27V Input
This module functions as a compact relay switch, activated through an auxiliary channel on your receiver. It’s ideal for controlling lights, sound, and other auxiliary electrical devices. The switch engages when the PWM duty cycle exceeds 1500µs and disengages when it falls below 1400µs.
Normal Mode:
The module can detect pulse widths ranging from 400 to 2600µs. If the pulse width exceeds 1800µs, the MOSFET switch will close; if it drops below 1200µs, the switch will open.
Safe-Protection Function:
This module includes a safe-protection feature to minimize the risk of unintended activation. Safe-protection mode activates under the following conditions:
1. If the pulse exceeds 1800µs at power-up, the MOSFET switch will remain open, and the LED will blink. Move the input to the off position to switch to normal mode.
2. If the signal is poor for more than 500ms, the MOSFET switch will open, and the LED will blink. When a good signal is restored, the device will deactivate safe-protection mode.
LED Indicators:
– In normal mode, the LED lights up when the input pulse is greater than 1800µs and turns off when it’s less than 1200µs.
– In safe-protection mode, the LED blinks rapidly.
30A RC Controlled Switch:
This switch supports high currents and has high reliability, making it suitable for high-voltage receivers. Its compact and lightweight design includes 18AWG silicone wires for power and super-soft silicone wires for the signal.
When the switch is activated, an LED indicates that the current must not exceed the nominal value, as doing so may cause the wires to heat up or burn.
Features:
- Applied to remote control model car aeroplane Lightbar Light on and off Application is simple and convenient – Insert switch channel.
- Power switch for various power supply and controlled equipment (disconnected to the positive pole, common negative).
- Electronic ignition, the output stage can be connected to the resistance heating wire.
- The electric start control increases the relay and the water pump switch.
- The wire adopts high current 18AWG silica gel wire, the plug is JST head (input female, output male), the signal wire is also made of super-soft silicone wire material, the total length of the power cord is about 20CM, the switch weight is about 11G.
- Support High Voltage (HV) Receivers
- Suggest 2 section control, ON/OFF stroke takes half of the travel for each.
Specifications:
| Max Current (A) | 30A |
| Allowed Wire Size (AWG): | 18 |
| Plug Type | JST |
| Cable Length (cm) | 20 |
| Net weight (g): | 9 |
T Motor Air 40A Esc
The T-Motor 40A AIR Multirotor ESC is compatible with various flight-control systems and supports a signal frequency of up to 621 Hz. It has a special core program for multi-rotor controllers that greatly improves throttle response and specially optimized software for excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. All settings except the timing are preset, making usage simple, highly intelligent and adaptive.
Feature:
- Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
- 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
- Throttle range can be configured and is fully compatible with all transmitters currently available on market.
- Smooth, linear and precise throttle response.
- Our pocket-sized Program Card can be purchased separately for extremely easily programming the ESC at the field.
- With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs that can be selected
Package includes :
1 x TIGER MOTOR FLAME 40A HV ESC
Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
The Axisflying 80A+F405/F722 STACK is built to handle demanding drone applications, especially for heavy builds or high-speed flight that require precise control and reliable power management.
Features:
- High Continuous Current: 80A per motor, providing strong power output to handle larger propellers and heavier drone builds.
- 6-8S LiPo Compatibility: Supports high-voltage input for enhanced performance and longer flight times.
- BLHeli_32 Firmware: Equipped with BLHeli_32 firmware, which supports advanced settings like RPM filtering, bidirectional DSHOT, and smooth throttle response.
- Advanced Protection: Includes over-current, over-temperature, and voltage monitoring for safe operation.
- F405/F722 Processor: Option between F405 and F722 processors; both deliver responsive flight control, with the F722 offering enhanced processing power for complex tasks.
- Betaflight OSD: Integrated OSD for in-flight monitoring of voltage, current, and other critical data on the FPV display.
- Multiple UART Ports: Available UART ports for peripherals like GPS, VTX, and Crossfire receivers.
- Gyro: MPU6000 gyro for stable, precise flight performance, even in high-vibration environments.
- Blackbox Logging: Flash memory for flight data logging, enabling post-flight analysis and tuning adjustments.Multiple UART Ports
Package Includes:
1 x Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
AxisFlying Argus PRO 32bit 65A 3-6S 30x30 4in1 ESC For Drones
The Axisflying Argus PRO ESC 65A is a high-performance electronic speed controller designed for demanding FPV drone applications. This ESC is part of the Argus PRO series, which integrates advanced technology with robust construction, ensuring reliable performance in various environments.
Features:
- IP54 Protection: Dustproof and splashproof design (not for underwater use).
- CNC Aluminum Cover: Enhances heat dissipation and stability during operation.
- High-Quality MOSFETs: Low internal resistance for improved power performance.
- Plug-and-Play Connectivity: Directly connects to various peripherals without soldering.
- Integrated Dual BEC: Supports direct connection for DJI O3 Air Unit.
- Up to 8 Motor Outputs: Compatible with X8 drone configurations.
- Status Indicator Lights: Easily check the working status of the flight controller.
Package Includes:
1 x Axisflying Argus PRO ESC 65A 3-6S 32Bit
1x To FC Cable
1x Rubber Ring
1x XT60 Power Cord
1x Ruby 35V 470μF Capacitor
1x SH1.0 8P Plastic Case (for FC Line)
Holybro Tekko32 F4 4in1 50A ESC STACK For Drones
Holybro Tekko32 F4 4in1 50A ESC is one of the first 4-In-1 ESC to adapt fast F4 MCU @ 150MHz for smooth control operation and quick response.
The Holybro Tekko32 F4 4-in-1 50A ESC Stack is a high-performance electronic speed controller (ESC) designed for FPV racing and freestyle drones. It integrates a Tekko32 F4 4-in-1 50A ESC with a Holybro Kakute H7 Flight Controller, offering smooth and powerful motor control with advanced features.
Features:
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16K to 96K
- A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Holybro Tekko32 F4 50A BLHeli_32 4-In-1 ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 4-in-1 60A ESC BLheli_32 Dshot 1200
The Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller. This compact 4-in-1 ESC is designed with a 30×30 mounting pattern and supports 3-6S LiPo batteries. It has all new High-quality MOSFETs with low internal resistance and low heat generation, ensuring efficient power delivery and a smooth flight experience while allowing the ESC to boast a continuous current of 60A. It has a separate drive and control circuit to broaden the current capability of the drive circuit while reducing electrical interference in the control circuit. With its cutting-edge BLHeli_32 firmware and 96K PWM frequency, enjoy lightning-fast response times and exceptional motor control.
Features:
- All new High-quality MOSFETs with low internal resistance and low heat generation
- Fast F4 MCU @150MHz (compared to F3 @108MHz & F0 @48MHz)
- A separate drive and control circuit, reducing the electrical interference
- Continuous Current Rating of 60 Amps
- Supports DShot 150/300/600/1200/2400
- Supports MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120
Package Includes:
1x Tekko32 F4 4in1 60A ESC
4x M3 Anti-Vibration Silicone Grommet Insert
1x Electrolytic capacitor: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 Metal 4-in-1 65A ESC (AM32) Dshot 1200
The Tekko32 Metal stands out as the market’s first 4in1 ESC to incorporate the swift F4 MCU operating at 150Mhz. It features a robust metal-cased MOSFET and supports PWM output up to 96K, suitable for 4~6S setups, and runs on BLHELI32 firmware. This ESC is renowned for its power and reliability, offering smooth control and a rapid response.
Features:
- New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM output up to 96K (default 48K)
- Metal-cased MOSFET for excellent heat dissipation
- Massive on-board capacitance for noise filtering at 2068uf
- 3 oz copper PCB design to allow bigger current and better heat dissipation
- Separate drive & control circuit, this broadens the current capability of the drive
- circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Tekko32 F4 Metal 4in1 65A ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Kakute Tekko32 F4 4in1 mini 50A ESC
The Holybro Tekko32 F4 4in1 Mini 50A ESC is a high-performance electronic speed controller designed for quadcopters and other multirotor aircraft. It features new high-quality MOSFETs with low internal resistance and heat generation, each equipped with individual metal heatsinks for optimal cooling.
Features:
- All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- Separate drive & control circuit, reducing the electrical interference to the control circuit
Package includes:
1 x Tekko32 F4 4in1 mini 50A ESC
4 x M2 Anti-Vibration Silicone Grommet Insert
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacito: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
ISDT ESC 70 Wp 1080 70A Brushed Motor Waterproof Esc 2-3S 5V-7.5V
An electronic speed control follows a speed reference signal (derived from a throttle lever, joystick, or other manual input) and varies the switching rate of a network of field effect transistors (FETs). By adjusting the duty cycle or switching frequency of the transistors, the speed of the motor is changed.
Features:
- Fully waterproof design for all conditions
- ESC gives great performance for your project
- Advanced electronic switch and Bluetooth two-in-one module
- Support real-time operating parameters and status via the ISD Go APP
- Built-in BEC with adjustable output features
product Includes:
1 X ISDT ESC70 WP 1080 70A Waterproof ESC 2-3S 5V-7.5V
Hobbywing 40A XRotor V1 Brushless ESC 2-6S LiPo
- Model Number:XRotor-40A
- Cont.Current:40A
- Burst Current(10sec):60A
- BEC: None
- Lipo:2-6S
- Programming:Timing (high/middle)
- Weight:26g
Hobbywing XRotor 40A APAC Brushless ESC 2-6S for RC multicopters.Using Multicopter special program, fast throttle response surpasses all kinds of open source software; Firmware is optimized specifically for disc motor, and it has very good compatibility. The ESC is highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing) easy to use.
The throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper so that a more stable flight; Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers.
Features:
- Using a Multintegrated circuitopter special program, fast throttle response surpasses all kinds of open source software.
- Firmware was optimized to specify integrated circuitously for disc motor, and it has very good compatibility.
- Highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing, easy to use.
- A throttle signal line is a twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight.
- Supports refresh rates up to 621Hz throttle signal, compatible with various flight controllers. (Note: the throttle signal over 500Hz are all non-standard throttle signals)
- Using MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.
- Ultra-low resistance MOSFET, strong flow capacity.
30A 1-6s Electronic Switch PWM 3.7-27V Input
30A 1-6s Electronic Switch PWM 3.7-27V Input
This module functions as a compact relay switch, activated through an auxiliary channel on your receiver. It’s ideal for controlling lights, sound, and other auxiliary electrical devices. The switch engages when the PWM duty cycle exceeds 1500µs and disengages when it falls below 1400µs.
Normal Mode:
The module can detect pulse widths ranging from 400 to 2600µs. If the pulse width exceeds 1800µs, the MOSFET switch will close; if it drops below 1200µs, the switch will open.
Safe-Protection Function:
This module includes a safe-protection feature to minimize the risk of unintended activation. Safe-protection mode activates under the following conditions:
1. If the pulse exceeds 1800µs at power-up, the MOSFET switch will remain open, and the LED will blink. Move the input to the off position to switch to normal mode.
2. If the signal is poor for more than 500ms, the MOSFET switch will open, and the LED will blink. When a good signal is restored, the device will deactivate safe-protection mode.
LED Indicators:
– In normal mode, the LED lights up when the input pulse is greater than 1800µs and turns off when it’s less than 1200µs.
– In safe-protection mode, the LED blinks rapidly.
30A RC Controlled Switch:
This switch supports high currents and has high reliability, making it suitable for high-voltage receivers. Its compact and lightweight design includes 18AWG silicone wires for power and super-soft silicone wires for the signal.
When the switch is activated, an LED indicates that the current must not exceed the nominal value, as doing so may cause the wires to heat up or burn.
Features:
- Applied to remote control model car aeroplane Lightbar Light on and off Application is simple and convenient – Insert switch channel.
- Power switch for various power supply and controlled equipment (disconnected to the positive pole, common negative).
- Electronic ignition, the output stage can be connected to the resistance heating wire.
- The electric start control increases the relay and the water pump switch.
- The wire adopts high current 18AWG silica gel wire, the plug is JST head (input female, output male), the signal wire is also made of super-soft silicone wire material, the total length of the power cord is about 20CM, the switch weight is about 11G.
- Support High Voltage (HV) Receivers
- Suggest 2 section control, ON/OFF stroke takes half of the travel for each.
Specifications:
| Max Current (A) | 30A |
| Allowed Wire Size (AWG): | 18 |
| Plug Type | JST |
| Cable Length (cm) | 20 |
| Net weight (g): | 9 |
T Motor Air 40A Esc
The T-Motor 40A AIR Multirotor ESC is compatible with various flight-control systems and supports a signal frequency of up to 621 Hz. It has a special core program for multi-rotor controllers that greatly improves throttle response and specially optimized software for excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. All settings except the timing are preset, making usage simple, highly intelligent and adaptive.
Feature:
- Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
- 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters.
- Throttle range can be configured and is fully compatible with all transmitters currently available on market.
- Smooth, linear and precise throttle response.
- Our pocket-sized Program Card can be purchased separately for extremely easily programming the ESC at the field.
- With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs that can be selected
Package includes :
1 x TIGER MOTOR FLAME 40A HV ESC
Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
The Axisflying 80A+F405/F722 STACK is built to handle demanding drone applications, especially for heavy builds or high-speed flight that require precise control and reliable power management.
Features:
- High Continuous Current: 80A per motor, providing strong power output to handle larger propellers and heavier drone builds.
- 6-8S LiPo Compatibility: Supports high-voltage input for enhanced performance and longer flight times.
- BLHeli_32 Firmware: Equipped with BLHeli_32 firmware, which supports advanced settings like RPM filtering, bidirectional DSHOT, and smooth throttle response.
- Advanced Protection: Includes over-current, over-temperature, and voltage monitoring for safe operation.
- F405/F722 Processor: Option between F405 and F722 processors; both deliver responsive flight control, with the F722 offering enhanced processing power for complex tasks.
- Betaflight OSD: Integrated OSD for in-flight monitoring of voltage, current, and other critical data on the FPV display.
- Multiple UART Ports: Available UART ports for peripherals like GPS, VTX, and Crossfire receivers.
- Gyro: MPU6000 gyro for stable, precise flight performance, even in high-vibration environments.
- Blackbox Logging: Flash memory for flight data logging, enabling post-flight analysis and tuning adjustments.Multiple UART Ports
Package Includes:
1 x Axisflying 80A+F405/F722 STACK for 13inch FPV Drone 6-8S Input 80A ESC + F05 STACK For 6s
AxisFlying Argus PRO 32bit 65A 3-6S 30x30 4in1 ESC For Drones
The Axisflying Argus PRO ESC 65A is a high-performance electronic speed controller designed for demanding FPV drone applications. This ESC is part of the Argus PRO series, which integrates advanced technology with robust construction, ensuring reliable performance in various environments.
Features:
- IP54 Protection: Dustproof and splashproof design (not for underwater use).
- CNC Aluminum Cover: Enhances heat dissipation and stability during operation.
- High-Quality MOSFETs: Low internal resistance for improved power performance.
- Plug-and-Play Connectivity: Directly connects to various peripherals without soldering.
- Integrated Dual BEC: Supports direct connection for DJI O3 Air Unit.
- Up to 8 Motor Outputs: Compatible with X8 drone configurations.
- Status Indicator Lights: Easily check the working status of the flight controller.
Package Includes:
1 x Axisflying Argus PRO ESC 65A 3-6S 32Bit
1x To FC Cable
1x Rubber Ring
1x XT60 Power Cord
1x Ruby 35V 470μF Capacitor
1x SH1.0 8P Plastic Case (for FC Line)
Holybro Tekko32 F4 4in1 50A ESC STACK For Drones
Holybro Tekko32 F4 4in1 50A ESC is one of the first 4-In-1 ESC to adapt fast F4 MCU @ 150MHz for smooth control operation and quick response.
The Holybro Tekko32 F4 4-in-1 50A ESC Stack is a high-performance electronic speed controller (ESC) designed for FPV racing and freestyle drones. It integrates a Tekko32 F4 4-in-1 50A ESC with a Holybro Kakute H7 Flight Controller, offering smooth and powerful motor control with advanced features.
Features:
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16K to 96K
- A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Holybro Tekko32 F4 50A BLHeli_32 4-In-1 ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 4-in-1 60A ESC BLheli_32 Dshot 1200
The Tekko32 F4 4in1 60A ESC is a high-performance electronic speed controller. This compact 4-in-1 ESC is designed with a 30×30 mounting pattern and supports 3-6S LiPo batteries. It has all new High-quality MOSFETs with low internal resistance and low heat generation, ensuring efficient power delivery and a smooth flight experience while allowing the ESC to boast a continuous current of 60A. It has a separate drive and control circuit to broaden the current capability of the drive circuit while reducing electrical interference in the control circuit. With its cutting-edge BLHeli_32 firmware and 96K PWM frequency, enjoy lightning-fast response times and exceptional motor control.
Features:
- All new High-quality MOSFETs with low internal resistance and low heat generation
- Fast F4 MCU @150MHz (compared to F3 @108MHz & F0 @48MHz)
- A separate drive and control circuit, reducing the electrical interference
- Continuous Current Rating of 60 Amps
- Supports DShot 150/300/600/1200/2400
- Supports MultiShot/OneShot/Proshot/PWM etc.
- ESC telemetry Supported
- Onboard analog current sensor
- BLHeli_32 firmware
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120
Package Includes:
1x Tekko32 F4 4in1 60A ESC
4x M3 Anti-Vibration Silicone Grommet Insert
1x Electrolytic capacitor: 1000uF 35v
1x 8pin to 8pin 1mm pitch 65mm cable
1x 8pin to 8pin 1mm pitch 25mm cable
Holybro Tekko32 F4 Metal 4-in-1 65A ESC (AM32) Dshot 1200
The Tekko32 Metal stands out as the market’s first 4in1 ESC to incorporate the swift F4 MCU operating at 150Mhz. It features a robust metal-cased MOSFET and supports PWM output up to 96K, suitable for 4~6S setups, and runs on BLHELI32 firmware. This ESC is renowned for its power and reliability, offering smooth control and a rapid response.
Features:
- New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM output up to 96K (default 48K)
- Metal-cased MOSFET for excellent heat dissipation
- Massive on-board capacitance for noise filtering at 2068uf
- 3 oz copper PCB design to allow bigger current and better heat dissipation
- Separate drive & control circuit, this broadens the current capability of the drive
- circuit while reducing the electrical interference to the control circuit.
Package Includes:
1 x Tekko32 F4 Metal 4in1 65A ESC
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacitor: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
Holybro Kakute Tekko32 F4 4in1 mini 50A ESC
The Holybro Tekko32 F4 4in1 Mini 50A ESC is a high-performance electronic speed controller designed for quadcopters and other multirotor aircraft. It features new high-quality MOSFETs with low internal resistance and heat generation, each equipped with individual metal heatsinks for optimal cooling.
Features:
- All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- Separate drive & control circuit, reducing the electrical interference to the control circuit
Package includes:
1 x Tekko32 F4 4in1 mini 50A ESC
4 x M2 Anti-Vibration Silicone Grommet Insert
4 x M3 Anti-Vibration Silicone Grommet Insert
1 x Electrolytic capacito: 1000uF 35v
1 x 8pin to 8pin 1mm pitch 65mm cable
1 x 8pin to 8pin 1mm pitch 25mm cable
